Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 224

Dimensions and Weight
• All mounting positions to 45 °C
• All mounting positions to 55 °C
• Number of outputs
Input voltage/loop-through
• Nominal value
Short-circuit protection of the output
• Response threshold
Power loss of the voltage distributor
Insulation
Insulation test voltage
• Ethernet interface
• All other circuit elements
Electrical isolation
• Between 1L+ and 2L+
Status, interrupts, diagnostics
Diagnostics functions
• Input/output voltage
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
Terminal block and voltage distributor
12.2 Voltage distributor
for X1 and X2 in total max. 4 A for 1L+
for X1 and X2 in total max. 4 A for 2L+
for X3 and X4 in total max. 4 A for 1L+
for X3 and X4 in total max. 4 A for 2L+
for X1 and X2 in total max. 3 A for 1L+
for X1 and X2 in total max. 3 A for 2L+
for X3 and X4 in total max. 3 A for 1L+
for X3 and X4 in total max. 3 A for 2L+
4, with 1L+ and 2L+ each
Green LED "1L+" and "2L+"
DC 24 V
Yes, electronic
Typ. 4.5 A
Typ. 3.5 W
1500 V (IEEE802.3, Type Test)
rms
707 V DC (type test)
Yes
Green LED "1L" and "2L"
225