Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 127

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
Technical data
Supported Ethernet services
PROFINET interface
• Connection socket
• Switch function
• Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
• Reverse polarity protection
• Infeed current 1L+
Supply voltage 2L+
• Reverse polarity protection
• Infeed current 2L+
Total current of the outputs
• All mounting positions to 60°C
Electrical isolation
• Between 1L+ and 2L+
• Between 1L+, channels and all other circuit ele­
ments
• Between channels
• Between Ethernet and all other circuit elements Yes
Insulation
Insulation test voltage
• Ethernet interface
• All other circuit elements
Current consumption
• From supply voltage (1L+)
• From supply voltage (2L+)
Power loss of the device
Digital outputs
Number of outputs
Status, interrupts, diagnostics
128
PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
2 x M12
Yes, internal
Yes, if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
Max. 4 A (only 2L+)
Yes
No
No
1500 V (IEEE802.3, Type Test)
rms
707 V DC (type test)
Typ. 100 mA
Typ. 5 mA
Typ. 3 W
8
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN