Exchange Object; Maintenance And Repair; Cleaning The I/O Device - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

6.4

Exchange object

Exchange object
With HW Config, the I/O devices are exchanged, for example, an 8-channel I/O device is
replaced by a 16-channel I/O device. The following takes place:
With the "Exchange object" function, the device name, IP-address, etc. are taken over. The
module/channel parameters are set to the "default" values.
6.5

Maintenance and repair

The components of the SIMATIC ET 200eco PN system are maintenance-free.
NOTE
Repairs to an ET 200eco PN I/O device may only be carried out by the manufacturer.
6.6

Cleaning the I/O device

When wired, ET 200eco PN I/O devices comply with degree of protection IP65/IP67 and do not
require any cleaning. If you do have to clean the I/O device, then use a dry or damp cloth.
Take care to comply with the conditions of degree of protection IP65/67 when cleaning with
liquids.
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
Maintenance
6.6 Cleaning the I/O device
77