4.6.2
watch-net, watch-tpe, and watch-net-
all
watch-net, watch-tpe, and watch-net-all monitor Ethernet packets on the
Ethernet cable(s) connected to the system. Good packets received by the system are
indicated by a period (.). Errors such as the framing error and the cyclic redundancy
check (CRC) error are indicated with an X and an associated error description.
CODE EXAMPLE 4-2
identifies the watch-net-all output message.
CODE EXAMPLE 4-2
ok watch-net
Internal loopback test --
succeeded.
Transceiver check -- Using
Onboard Transceiver - Link up.
passed
Looking for Ethernet packets.
'.' is a good packet.'X' is a
bad packet.
Type any key to stop.
identifies the watch-net output message.
watch-net Output Message
Using Onboard
Transceiver - Link
up.
CODE EXAMPLE 4-3
Chapter 4
Troubleshooting Procedures
4-9