FIGURE 6-2
6.2
Powering Off the System
To power-off the system, proceed as follows.
Caution – Prior to turning off system power, exit from the operating system. Failure
to do so may result in loss of data.
1. Notify users that the system is going down.
2. Back up system files and data.
3. Halt the system.
4. Set the power on/standby switch to the stand-by (O) position
(
FIGURE 6-1
5. Verify the following:
a. Front panel LED is off.
b. System fans are not spinning.
Caution – Disconnect the AC power cord from the AC receptacle prior to handling
the power supply. When servicing system components other than the power supply,
the AC power cord should remain connected to the AC receptacle.
6-2
Ultra 1 Creator Series Service Manual • August 1996
Sun Type-5 Keyboard
) or press the Sun Type-5 keyboard power-on key (
).
FIGURE 6-2