Sun Microsystems Ultra 1 Creator Series Service Manual page 17

Warnings and Cautions
Caution – This equipment contains lethal voltage. Accidental contact can result in
‰
serious injury or death. The surface of the UltraSPARC CPU chip may be hot and
cause personal injury if touched. Avoid contact.
!
Caution – Improper handling by unqualified personnel can cause serious damage to
this equipment. Unqualified personnel who tamper with this equipment may be
held liable for any resultant damage to the equipment.
Caution – Use proper ESD grounding techniques when handling components. Wear
!
an antistatic wriststrap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
Individuals servicing this equipment must observe all safety precautions and ensure
compliance with skill level requirements, certification, and all applicable local and
national laws.
Procedures in this document must be performed by trained maintenance providers.
TM
Only people who have been trained by the Sun Microsystems training facilities (or
by Sun Microsystems affiliates) and have been certified as required by local and
national laws are considered qualified.
Note – Prior to performing service or repair, carefully read the associated procedure.
If a similar repair has not been performed on comparable equipment, DO NOT
ATTEMPT to perform the procedure.
Preface xvii