Figure 9-10 Positioning The Diskette Drive; Figure 9-11 Positioning The Diskette Drive - Sun Microsystems Ultra 1 Creator Series Service Manual

5. Remove the CD-ROM drive or 4-mm/8-mm tape drive.
See Section 9.3.1 "Removing a CD-ROM Drive or 4-mm/8-mm Tape Drive" on
page 9-10.
6. Remove the four screws securing the diskette drive to the chassis bracket
( ).
FIGURE 9-10
7. Remove the diskette drive.
8. Place the diskette drive on an antistatic surface.
Positioning the Diskette Drive
FIGURE 9-10
Screw (4)
Chassis bracket
Diskette
drive
Chapter 9 Storage Devices 9-13