FIGURE 9-4
9.2
Media Bay Chassis Bracket
It is necessary to remove and replace the media bay chassis bracket (chassis bracket)
in order to remove and replace either the CD-ROM drive (or 4-mm/8-mm tape
drive) or the diskette drive. The chassis bracket is not a field replaceable unit (FRU).
To remove and replace the chassis bracket, proceed as follows.
9.2.1
Removing the Chassis Bracket
1. Remove the DC harness as follows (
a. Remove the two screws securing the chassis to the chassis bracket.
b. Remove the DC harness from the chassis bracket clip.
2. Disconnect the DC harness from the peripheral power cable at P1.
Chassis
EMI door
Replacing the EMI Door
):
FIGURE 9-5
Chapter 9
Storage Devices
9-5