Probe-Scsi And Probe-Scsi-All - Sun Microsystems Ultra 1 Creator Series Service Manual

CODE EXAMPLE 4-3
ok watch-net-all
/sbus@1f,0/lebuffer@1,40000/le@1,60000
Internal loopback test -- succeeded.
External loopback test -- succeeded.
Looking for Ethernet packets.
'.' is a good packet.
Type any key to stop.
.........................................................
...................
............................(keyboard key pressed here)
/sbus@1f,0/SUNW,hme@e,8c00000
Internak loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Link Up.
passed
Using Onboard Transceiver - Link Up.
Looking for Ethernet packets.
'.' is a good packet.
Type any key to stop.
.........................................................
..................
4.6.3

probe-scsi and probe-scsi-all

probe-scsi transmits an inquiry command to internal and external SCSI devices
connected to the Ultra 1 Creator series on-board SCSI interface. If the SCSI device is
connected and active, the target address, unit number, device type, and
manufacturer name is displayed. probe-scsi-all transmits an inquiry command
to SCSI devices connected to the system SCSI host adapters. The first identifier listed
in the display is the SCSI host adapter address in the system device tree followed by
the SCSI device identification data.
4-10 Ultra 1 Creator Series Service Manual • August 1996
watch-net-all Output Message
'X' is a bad packet.
'X' is a bad packet.