Watch-Net And Watch-Net-All - Sun Microsystems Sun Ultra 30 Service Manual

4.6.2

watch-net and watch-net-all

watch-net and watch-net-all monitor Ethernet packets on the Ethernet
interfaces connected to the system. Good packets received by the system are
indicated by a period (.). Errors such as the framing error and the cyclic redundancy
check (CRC) error are indicated with an X and an associated error description.
CODE EXAMPLE 4-2
identifies the watch-net-all output message.
CODE EXAMPLE 4-2
ok watch-net
Hme register test --- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Link Up.
passed
Using Onboard Transceiver - Link Up.
Looking for Ethernet Packets.
'.' is a Good Packet. 'X' is a Bad Packet.
Type any key to stop.
.............
ok
CODE EXAMPLE 4-3
ok watch-net-all
/pci@1f,4000/network@1,1
Hme register test --- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Link Up.
passed
Using Onboard Transceiver - Link Up.
Looking for Ethernet Packets.
'.' is a Good Packet. 'X' is a Bad Packet.
Type any key to stop.
.
ok
-8 Sun Ultra 30 Service Manual • April 1998
identifies the watch-net output message.
watch-net Output Message
watch-net-all Output Message
CODE EXAMPLE 4-3