Removing A Dsimm; Table 10-2 Dsimm Bank And Socket Pair Locations - Sun Microsystems Ultra 1 Creator Series Service Manual

Caution – Each DSIMM bank must contain two DSIMMs of equal density (for
example: two 16-Mbyte DSIMMs to function properly. Do not mix DSIMM densities
in any bank.
TABLE 10-2
Bank
0
1
2
3
10.5.1

Removing a DSIMM

Caution – Handle DSIMMs only by the edges. Do not touch the DSIMM
components or metal parts. Always wear a grounding strap when handling a
!
DSIMM.
1. Power-off the system.
See Section 6.2 "Powering Off the System" on page 6-2.
2. Remove the unit cover.
See Section 7.1 "Removing the Cover" on page 7-1.
Caution – Use proper ESD grounding techniques when handling components. Wear
!
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
3. Attach the wrist strap.
See Section 7.2 "Attaching the Wrist Strap" on page 7-2.
4. Locate the DSIMM to be removed.
5. Push the lever away from the DSIMM (
10-24 Ultra 1 Creator Series Service Manual • August 1996
DSIMM Bank and Socket Pair Locations
Socket Pair
U0701 + U0601
U0702 + U0602
U0703 + U0603
U0704 + U0604
).
FIGURE 10-21