Replacing The Diskette Cable; Figure 8-12 Diskette Cable - Sun Microsystems Ultra 1 Creator Series Service Manual

Disk drive bay
FIGURE 8-12
8.4.2

Replacing the Diskette Cable

Caution – Use proper ESD grounding techniques when handling components. Wear
!
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
1. Connect the diskette cable to the socket (marked FLOPPY) on the SCSI backplane.
2. Connect the diskette cable to the diskette drive (
8-16 Ultra 1 Creator Series Service Manual • August 1996
SCSI backplane
Diskette Cable
Drive bracket
Diskette drive
Diskette cable
).
FIGURE 8-12