Figure 10-1 Dc Power Disconnection - Sun Microsystems Ultra 1 Creator Series Service Manual

b. Speaker/LED cable.
See Section 8.7.1 "Removing the Speaker/LED Cable" on page 8-29.
c. DC power cables at J2601 and J2603 (
DC Power Disconnection
FIGURE 10-1
7. Loosen the two captive screws that secure the system board back panel to the
chassis (
FIGURE 10-2
8. Grasp the system board and slide it out of the chassis (
Caution – Handle the system board by the back panel or by the edges only.
!
9. Place the system board on an antistatic surface.
J2603
).
Chapter 10 System Board and Component Replacement
).
FIGURE 10-1
System board
FIGURE 10-3
J2601
).
10-3