Figure 56: Routing Engine Management Ports And Alarm Relay Contacts - Juniper Internet Router M160 Hardware Manual

Figure 56: Routing Engine Management Ports and Alarm Relay Contacts

To connect external devices to the Routing Engine management ports, perform
the procedures described in the following sections:
HOST
0
ETHERNET
ACT
YEL=10Mb
GRN=100Mb
CONSOLE
AUXILIARY
Routing
HOST
1 Engine ports
ETHERNET
ACT
YEL=10Mb
GRN=100Mb
CONSOLE
AUXILIARY
BITS A
LINK
BITS
BITS B
input ports
LINK
RED ALARM
NC
C
NO
Alarm relay
NC
contacts
C
NO
YELLOW
ALARM
Connecting to a Network for Out-of-Band Management on page 114
Connecting to a Management Console or Auxiliary Device on page 114
Connecting to an External Alarm-Reporting Device on page 115
Connecting the Router to Management and Alarm Devices
Connecting the Router and Performing Initial Configuration
113