Running Inspect - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Running Inspect

To run Inspect, complete the following steps:
1. Reboot the server by pressing the Ctrl+Alt+Delete keys.
2. Press the appropriate key when the following prompt appears at the top
of the screen during POST.
Press "F 9" key for ROM-Based Diagnostics
Press "F10" key for System Partition Utilities
IMPORTANT:
F9 or F10 during this time, you must reboot the server.
3. Select the Diagnostics and Utilities option.
4. Select Inspect the Computer. Operating environment information
is displayed.
5. Review, print, file, or discuss this information with your Authorized
Compaq Reseller or Service Provider.
The text appears for only two seconds. If you do not press either
Writer: Project: Diagnostic Tools Comments:
File Name: O-ch11.doc Last Saved On: 4/22/97 1:11 PM
Compaq ProLiant 5000 Servers Reference Guide
11-37