Compaq ProLiant 5000 Reference Manual page 162

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-28 Server Management
Remote Management Features
Feature
ROM-Based
Diagnostics
Server Restart
Configuration Utility
Firmware Updates
Continued
Automatically invokes when the disk-based diagnostics
cannot be accessed. It also allows you to view the Health
Logs and run ROM-based diagnostics locally. Press F9
during the restart process when the cursor moves to the
upper-right corner of the monitor.
Provides the ability to restart the server remotely from
Compaq Insight Manager while the operating system is
running. It allows the server to restart back to the operating
system or restart to the system partition. This activity
provides a complete system reset to all peripherals. If you
select Boot to Compaq Utilities from Insight Manager, then
Compaq Utilities loads the appropriate remote services so
that remote access is available. If network status is
enabled, then the network support is loaded. If Dial-In
status is enabled, then the modem is set to auto answer.
Provides the ability to run the Compaq System
Configuration Utility remotely. You can also run the remote
configuration utility locally. Press F10 during the restart
process when the cursor moves to the upper-right corner
of the monitor.
Allows you to update the server's firmware remotely. It
uses firmware images on the system partition that might
have been previously uploaded with the file transfer
services.
Writer: Project: Server Management Comments:
File Name: N-ch10.doc Last Saved On: 4/23/96 11:31 AM
Description