Ibm Os/2 2.X Device Drivers From Compaq; Creating And Using The Configuration Backup And Configuration History Files - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IBM OS/2 2.x Device Drivers
from Compaq
Your server must have certain device drivers for some server options to
operate using IBM OS/2 2.x. These drivers are located on the Compaq
SmartStart CD you received with your server. If you use SmartStart to
configure the server, these drivers will be loaded automatically
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart CD into the drive.
2. Boot your system.
3. Select Non-SmartStart Setup.
4. Follow the instructions that display on the monitor.
Creating and Using the
Configuration Backup and
Configuration History Files
When saving and exiting the System Configuration Utility, the utility keeps a
history of the configuration. The utility maintains three versions of the system
configuration files including the current and two previous configurations in
both binary (.SCI) and text (.CHL) file formats. The .CHL files are text-based
files displaying information that is stored in the corresponding .SCI file.
The .SCI files can be used to restore a previous configuration using the
System Configuration menu and Restore System Configuration from a .SCI
File submenu.
Writer: Project: Using the Compaq System Configuration Utility Comments:
File Name: J-ch6.doc Last Saved On: 4/18/97 6:43 PM
Compaq ProLiant 5000 Servers Reference Guide
6-15