Opening The Tray Manually - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Opening the Tray Manually

If the tray will not open automatically you can open it manually by using the
emergency eject button.
NOTE : Certain applications or operating system software may disable the eject
button to prevent accidental damage to the disc. If the eject button is disabled by
the application software, it will not operate.
CAUTION:
computer.
1. Insert a metal rod such as a straightened paper clip into the emergency
eject hole and push firmly.
Figure A-3. Opening the internal CD-ROM tray manually
2. Slowly pull the tray out from the drive until the tray is fully extended,
then remove the disc.
Writer: Project: Using the Internal CD-ROM Drive Comments:
Before beginning this procedure, turn off the power to your
File Name: R-appa.doc Last Saved On: 4/22/97 1:17 PM
Compaq ProLiant 5000 Servers Reference Guide
A-3