External Storage; Connecting Peripheral Devices - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-22 Installing the Compaq ProLiant 5000 Server

External Storage

Optional mass storage devices can be connected to the Compaq ProLiant 5000
by using the External Fast-Wide SCSI-2 Port on the back of the unit, or the
Fast-Wide SCSI-2 Port on the optional Fast-Wide SCSI-2 Controllers.
IMPORTANT:
internal drives and connect the cable for the CD-ROM drive to the internal narrow
SCSI connector.

Connecting Peripheral Devices

After all options have been installed and the Side Access Panel has been
replaced, peripheral devices should be connected. Icons on the back of the
unit identify the function of each connector.
Figure 2-18.
CAUTION:
before you plug in or unplug the keyboard cable from the server.
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
If you use the external port, you must disconnect the cable for the
Connectors on the back of the ProLiant 5000
To avoid damage to the server, ensure that the power is OFF
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM