Compaq ProLiant 5000 Reference Manual page 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4 Installing the Compaq ProLiant 5000 Server
b. Install other options such as additional processors, memory, hard
3. Connect peripheral devices (keyboard, mouse, monitor, network
cables) and the AC power cord.
Figure 2-2.
4. Insert the SmartStart CD and turn on the server. The ON-OFF power
switch is located beneath a protective cover on the front bezel. (See
Appendix A for instructions on using the CD-ROM drive.)
When the server boots from the SmartStart program, it will automatically start
the Compaq System Configuration Utility. When the configuration utility is
completed, you will be prompted to turn the server off, install any ISA boards
(any switch settings required will be provided by the configuration utility),
and then boot the server again from the SmartStart program.
For complete details on the SmartStart program, refer to the SmartStart
installation card included in your SmartStart package.
Once the SmartStart program has finished configuring your system, the
installation of your new Compaq Server is complete.
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
drives, and external storage devices.
Connecting the power cord and turning ON the server
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM