Front Bezel Keylock - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuration Lock: Set switch 2 to the ON position to lock the
configuration in non-volatile memory. By setting this switch to ON, you
cannot change the configuration in nonvolatile memory.
If the switch is OFF, you can change the configuration.
Configuration
Can Be
Changed
Figure 12-3. Switch 2 set to ON

Front Bezel Keylock

The external keylock protects the removable media components of the server.
Turn the key counterclockwise to its locked position. To gain access to
internal components and pluggable drives:
1. Unlock the front bezel (door) by turning the key clockwise.
2. Open the front bezel. It opens like a door on hinges.
3. Remove or install any pluggable drives.
4. Read the warning in the front matter of the hard copy reference guide
before removing the side access panel.
5. Loosen the three thumbscrews 1/4 turn and remove the side access
panel. This allows you to gain access to internal components, including
the processor boards, memory boards and expansion boards.
Configuration
Can Not Be
Changed
locks the configuration
in non-volatile memory
Writer: Project: Security Comments:
File Name: P-ch12.doc Last Saved On: 4/22/97 1:14 PM
Compaq ProLiant 5000 Servers Reference Guide
12-9