Compaq ProLiant 5000 Reference Manual page 103

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 4: Examine Required Switches
Use this step to find the required switch and jumper settings for most ISA
boards. The switch and jumper settings for EISA boards are also available
through this option.
Then adjust the switch and jumper settings on each board to match the settings
displayed on the screen.
Step 5: Save and Exit
Use this step to save the configuration update whenever changes are made.
Setting Power-On Defaults
You can set and change the Power-On features at any time.
1. Select System Configuration from the Main Menu and then select
Power-On Defaults.
2. Set the current date in the format:
MM-DD-YYYY
3. Set the correct time in the format:
HH:MM:SS
4. Set the Power-On Num Lock state:
( ) OFF
(*) ON
* This activates the numeric keypad when the computer is turned ON.
Writer: Project: Using the Compaq System Configuration Utility Comments:
File Name: J-ch6.doc Last Saved On: 4/18/97 6:43 PM
Compaq ProLiant 5000 Servers Reference Guide
6-5