System Partition; Creating A New System Partition - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6 Using the Compaq System Configuration Utility

System Partition

The System Partition option allows you to copy and delete configuration
files, and create, upgrade, or delete a system partition on the hard drive for
the utilities.
The following menu options are available:
Create System Partition
Upgrade System Partition
Delete System Partition
Copy Files
Delete Files

Creating a New System Partition

If you used SmartStart to configure your server and install your operating
system, then this procedure was done for you. Use this procedure if the
operating system was not installed on the server.
To create a new system partition, follow this procedure:
1. Insert the Compaq SmartStart CD in the CD-ROM drive and turn on
the server.
IMPORTANT:
beginning of the hard drive and an unused entry in the boot record. SmartStart will
prompt you to overwrite an existing DOS partition on the hard drive.
2. If the system is configured and there is space on the hard drive for the
system partition, SmartStart automatically creates the partition and
copies the Compaq Utilities from the Compaq SmartStart CD to the
partition. This process takes two reboots. Leave the CD in the drive
until the process completes. The process is complete when the CD main
menu displays.
Writer: Project: Using the Compaq System Configuration Utility Comments:
The system partition requires six megabytes of disk space at the
File Name: J-ch6.doc Last Saved On: 4/18/97 6:43 PM