Upgrading From Smartstart And Diskettes; Upgrading From The Hard Drive - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-24 Installing the Compaq ProLiant 5000 Server
Upgrading from SmartStart
and Diskettes
1. Insert the SmartStart CD into the CD-ROM drive.
2. Turn ON the server.
3. Select language, country and keyboard.
4. Select Non-SmartStart Setup.
5. Select Create Support Software Diskettes From CD.
6. Select Toolbox.
7. Select Systems Utilities.
8. Highlight the System ROMPaq diskette or Option ROMPaq Diskette
entry and press the Build button, then follow the prompts to create the
diskette. Use the diskette to flash the ROM.

Upgrading from the Hard Drive

If the system partition already has been upgraded with the latest version of the
Compaq System Configuration Utility, complete the following steps.
1. Cycle the server by turning the power OFF, then ON.
2. Press the F10 key when the following prompt appears at the top of the
screen during POST.
Press "F 9" key for ROM-Based Diagnostics
Press "F10" key for System Partition Utilities
IMPORTANT:
or F10 during this time, you must restart the server.
3. From the main menu, select Diagnostics and Utilities, then select
Upgrade Firmware. Press Enter to continue at the ROMPaq
welcome screen.
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
The text appears for only two seconds. If you do not press either F9
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM