Compaq ProLiant 5000 Reference Manual page 157

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Option Settings for Booting into Compaq Utilities
Option
Network host
name
Network card
slot
Network frame
type
Network IP
address
Setting
CPQHOU
Slot #
ETHERNET_II
Writer: Project: Server Management Comments:
File Name: N-ch10.doc Last Saved On: 4/23/96 11:31 AM
Continued
Description
Enter the network name of the server. Use
underscores instead of spaces within the name.
For example, Compaq_Server.
If you are using IPX network access to the
Compaq Utilities, this is the server name that is
used to advertise NVT host services. This is the
server name that will be displayed in the Insight
Manager server list when it determines it can
communicate via NVT. You should set this name
to be the same as the server name you assign
when the host OS is running.
Select the slot number of the network interface
card you wish to use for network access to the
Compaq Utilities.
Select the frame type for your network.
Selections include both Ethernet and
Token Ring topologies.
Enter the IP address for this server in standard
dot notation.
NOTE: This is not used if you select Custom for
Network controller. You must enter your IP
address in the NET.CFG file that you load into
the system partition.
Compaq ProLiant 5000 Servers Reference Guide
10-23
continued