Sco Unix, Open Server And Sco Unixware2 Device Drivers From Compaq - Compaq ProLiant 5000 Reference Manual

Hide thumbs Also See for ProLiant 5000:
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-14
Using the Compaq System Configuration Utility
SCO UNIX, Open Server and
SCO UnixWare2 Device Drivers
from Compaq
Your server must have certain device drivers for some server features to
operate under the SCO UNIX, Open Server and SCO UnixWare 2 Operating
Systems. These drivers are located on the Compaq SmartStart CD shipped
with the server. If you use SmartStart to configure the server, these drivers
will be installed automatically.
The features requiring device drivers are as follows:
Compaq Ethernet/Token Ring Adapter
Automatic Server Recovery-2
Compaq Fast-Wide SCSI-2 Controller
Compaq ProLiant Storage System
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart CD into the CD-ROM drive.
2. Boot your system.
3. Select Non-SmartStart Setup.
4. Follow the instructions that display on the monitor.
Writer: Project: Using the Compaq System Configuration Utility Comments:
File Name: J-ch6.doc Last Saved On: 4/18/97 6:43 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant 5000r

Table of Contents