Compaq ProLiant 5000 Reference Manual page 168

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POST Error Messages
Error Code
207-Invalid Memory
Configuration - Check
DIMM Installation
208-Invalid Memory
Speed - Check DIMM
Installation
211-Cache Switch
Set Incorrectly
212-System
Processor
Failed/Mapped out
213-System
Processor Not
Installed
214-DC-DC Converter
Failed
301-Keyboard Error
301-Keyboard Error
or Test Fixture
Installed
* L= Long
S = Short
Continued
Audible
Beeps*
None Memory module installed
incorrectly
1L,1S The speed of the memory
is too slow.
None Switch not set properly
during installation or
upgrade
1S Processor in slot x failed.
1S System processor
configured for slot
indicated is missing.
None PowerSafe Module (DC-DC
Converter) Failed
None Keyboard failure
None Keyboard failure
Writer: Project: Diagnostic Tools Comments:
File Name: O-ch11.doc Last Saved On: 4/22/97 1:11 PM
Probable Source of
Problem
Verify placement of
memory modules.
The speed of the
memory modules must
be 60 ns. Verify the
speed of the memory
modules installed.
Verify switch settings.
Run Diagnostics.
Contact your service
provider
Install processor in the
slot indicated or run
the System
Configuration Utility to
remove the processor
from the .CFG file.
Run Diagnostics.
Contact your service
provider.
Turn off the computer,
then reconnect the
keyboard.
Replace the keyboard.
Compaq ProLiant 5000 Servers Reference Guide
11-5
Action
continued