Compaq ProLiant 5000 Reference Manual page 212

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DAAD Diagnostic Messages
Error Messages
WARNING BIT DETECTED
WRONG ACCELERATOR
Continued
A monitor and performance threshold violation may have
occurred. The status of a logical drive may not be OK. Check
the other error messages for an indication of the problem.
This could mean that either the board was replaced in the
wrong slot or placed in a system that was previously
configured with another board type. Included with this
message is a message indicating the type of adapter sensed
by DAAD and a message indicating the type of adapter last
configured in System nonvolatile RAM. Check the diagnosis
screen for other error messages. Run the System
Configuration Utility to update the system configuration.
Writer: Project: Diagnostic Tools Comments:
File Name: O-ch11.doc Last Saved On: 4/22/97 1:11 PM
Possible Corrective Action
Compaq ProLiant 5000 Servers Reference Guide
11-49