Windows Nt 3.5X Device Drivers From Compaq - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows NT 3.5x Device Drivers
from Compaq
Drivers are supplied to support Windows NT 3.5x on ProLiant servers. They
are located on the Support Software Diskette (SSD) for Windows NT, and
some of the drivers are contained on the Windows NT retail product. These
drivers are also located on the Compaq SmartStart CD. The drivers on the
SSD may be newer versions due to new functionality, problem fixes and so
on. If you use SmartStart to configure the server, these drivers will be
installed automatically.
For more information on the drivers, run the README.BAT file in the root
directory of the SSD for Windows NT. This will load the WinHelp file
NTREADME.HLP.
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart CD into the CD-ROM drive.
2. Boot your system.
3. Select Non-SmartStart Setup.
4. Follow the instructions that display on the monitor.
Writer: Project: Using the Compaq System Configuration Utility Comments:
File Name: J-ch6.doc Last Saved On: 4/18/97 6:43 PM
Compaq ProLiant 5000 Servers Reference Guide
6-13