. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-14
Installing the Compaq ProLiant 5000R Server
Installation Guidelines
Installations with one, two, three or four processors are supported. To
maximize performance with fewer than four processors, populate the
processor slots in the sequence indicated in Table 3-2.
First
Second
Third
Fourth
Figure 3-9 identifies processor sockets on boards installed in I/O board
slots 9 and 10.
Figure 3-9. Identifying processor slots on two processor boards
See Appendix D, "Switch Settings," for processor board switch information.
Writer: Compaq Project: Installing the Compaq ProLiant 5000R Server Comments:
Table 3-2
Processor Locations
Processor
File Name: G-ch3.doc Last Saved On: 4/18/97 5:14 PM
Location
Board in Slot 9, Socket 1
Board in Slot 9, Socket 2
Board in Slot 10, Socket 1
Board in Slot 10, Socket 2