Compaq ProLiant 5000 Reference Manual page 70

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-20 Installing the Compaq ProLiant 5000R Server
3. Disconnect the AC power cord and any peripheral devices.
4. With the server extended in the rack and the cover and "Y" bracket
removed, slide the internal tray back and fold up the plastic cable
shield.
Figure 3-14. Folding up the plastic cable shield
5. Set the SCSI ID for the storage device. (See the User Guide that
accompanies the specific option for more information.)
6. Remove the terminating resistors.
7. Detach the Removable Media Bay Trim Ring from the server face
plate.
Writer: Compaq Project: Installing the Compaq ProLiant 5000R Server Comments:
File Name: G-ch3.doc Last Saved On: 4/18/97 5:14 PM