Replacing The Fuses Of The Infinity Valve Drive - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

11 Maintenance

Replacing the Fuses of the Infinity Valve Drive

Replacing the Fuses of the Infinity Valve Drive

When
If the flow module shows no reaction.
Tools required Description
Screwdriver
Parts required #
2
Electrical shock
WAR N IN G


1 Switch off the instrument. The line switch is located at
the rear of the module.
2D-LC - User Guide
p/n Description
2110-1486 Fuse 2 AT250 V
Disconnect the module from line power before changing a fuse or trying
to open the hatch of the power input socket.
Never reconnect the line power before havingthe power input socket
closed.
2 Disconnect the power cable from the power input
socket.
274