Installation Of The 2D-Valves; Attaching The External Valve Drives - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

4 Installation

Installation of the 2D-Valves

Installation of the 2D-Valves

Attaching the external valve drives

For InfinityLab 2D-LC instruments that comprise at least one 1260 Infinity II or
1290 Infinity II pump, valve drives are attached to this pump with the Valve Clamp
Kit IF II (5067-5685), while the valve drives are interconnected by the Adapter
profile (5043-0269). The 2D-LC valve and if selected the MHC decks are mounted
on external valve drives (G1170A).
#
3
1
2
For a SHC configuration, the 2D-LC valve (G4236A) is attached to the upper
pump of the stack. In case of a MHC configuration, the upper MHC deck is
attached to the upper pump.
2D-LC - User Guide
Holders / connectors
1290 Infinity Valve Drive (must be purchased sepa-
rately)
Clamp Guide Kit IF II (delivered with G1170A)
Adapter-profile (delivered with MHC Decks)
Connection P/N
Mooting of Valves G1170A
Top valve to pump 5067-5685
between G1170A 5043-0269
drives
75