General Safety Information; Safety Standards - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

16 Appendix

General Safety Information

General Safety Information

General Safety Information

The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer's failure to comply with these
requirements.
Ensure the proper usage of the equipment.
WAR N IN G
The protection provided by the equipment may be impaired.


Safety Standards

This is a Safety Class I instrument (provided with terminal for protective earthing)
and has been manufactured and tested according to international safety
standards.
2D-LC - User Guide
The operator of this instrument is advised to use the equipment in a
manner as specified in this manual.
343