Configuration - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

6 Run the System
Comprehensive 2D-LC

Configuration

Overview Configuration Dialog
Check box
Pumps
Detectors
Columns
Valves, loops, and capillaries
Figure 77
The configuration of the 2D-LC-system is done via the configuration dialog in the
software. The order of configuration is mandatory. The following configuration
parameters are available:
•
•
•
•
2D-LC - User Guide
Overview 2D-LC configuration grafical user interface
Pumps
Section to define which pump is in the first and which one in the second
dimension.
Detectors
Section to define which detector is in the second dimension and which
detector should be used for peak detection (optional).
Columns
Section to define the columns being used in 1st and 2nd dimension.
Valve topology, 2D-LC Valve, Multiple Heart-Cutting Valves, Diverter Valve,
Capillaries
Section to identify the modulation valve(s) used for toggling the loop(s) and
section to define the volume of the sampling loop(s).
176