Agilent 2D-Lc Solution With An Agilent Single Quadrupole Detector - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

Hide thumbs Also See for 1290 Infinity II 2D-LC Solution:
Table of Contents

Advertisement

14
Agilent 2D-LC Solution with the selectivity of mass selective detection (MSD)

Agilent 2D-LC Solution with an Agilent Single Quadrupole Detector

Agilent 2D-LC Solution with an Agilent Single
Quadrupole Detector
Agilent OpenLab 2D-LC Software is a fully integrated solution from method setup
to data analysis for 2D-LC/MS within OpenLab CDS ChemStation Edition. It
combines the separation power of two-dimensional chromatography with the
selectivity of mass selective detection (MSD) in the second dimension. It can be
used with all Agilent Single Quadrupole Detectors supported by ChemStation
including latest LC/MSD (G6125B) and LC/MSD XT (G6135B). Only UV detectors
may be configured in
The 2D-LC system has been optimized for detectors connected to the CAN bus
NOTE
interface. For non-CAN detectors (e.g. third party detectors), suitable run time
settings need to be conisdered in order to get complete signal data, see KPR 25
in the software status bulletin for details.
2D-LC - User Guide
1
D as peak triggering detectors.
312

Advertisement

Table of Contents
loading

This manual is also suitable for:

1290 infinity ii 2d-lc solution chemstation

Table of Contents