General; Before Applying Power; Ground The Instrument - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

16 Appendix
General Safety Information

General

Do not use this product in any manner not specified by the manufacturer. The
protective features of this product may be impaired if it is used in a manner not
specified in the operation instructions.

Before Applying Power

Wrong voltage range, frequency or cabling
WAR N IN G
Personal injury or damage to the instrument



Note the instrument's external markings described under
NOTE
page 348.

Ground the Instrument

Missing electrical ground
WAR N IN G
Electrical shock


2D-LC - User Guide
Verify that the voltage range and frequency of your power distribution
matches to the power specification of the individual instrument.
Never use cables other than the ones supplied by Agilent Technologies
to ensure proper functionality and compliance with safety or EMC
regulations.
Make all connections to the unit before applying power.
If your product is provided with a grounding type power plug, the
instrument chassis and cover must be connected to an electrical ground
to minimize shock hazard.
The ground pin must be firmly connected to an electrical ground (safety
ground) terminal at the power outlet. Any interruption of the protective
(grounding) conductor or disconnection of the protective earth terminal
will cause a potential shock hazard that could result in personal injury.
"Safety Symbols" on
344