Set Flow - Agilent Technologies 1290 Infinity II 2D-LC Solution User Manual

5 Method Parameters
Method Parameters Multiple Heart-Cutting and High Resolution Sampling
2D-LC

Set flow

Figure 57
1 Set the
2 To set and use Idle Flow select check box use idle flow.
If use idle flow is not selected, the
NOTE
2D-LC - User Guide
Flow settings
2
D Flow (range 0 – 5.0 mL/min).
This defines the flow in the 2
(within 2D time segments where mode is not equal to OFF)
This defines the flow in the 2
is OFF (range 0 – 5.0 mL/min).
nd
dimension being used while 2D-LC is active
nd
dimension that is used while the 2D-LC mode
2
D Flow is also used while 2D-LC mode is OFF.
110