Default Type; Default-Cost - 3Com 5500G-EI Command Reference Manual

[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf-1]default tag 10

default type

Syntax
default type { 1 | 2 }
undo default type
View
OSPF view
Parameters
Enter to set the default to external routes of type 1.
1
Enter to set the default to external routes of type 2.
2
Description
Use the
redistributes external routes.
Use the
external routes are imported as type 2.
OSPF requires a default type when redistributing a route found by other routing
protocols.
Related command:
Example
To specify the default type as type 1 when OSPF imports an external route, enter
the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf-1]default type 1

default-cost

Syntax
default-cost
undo default-cost
View
OSPF Area view
Parameter
value
NSSA area, in the range 0 to 16777214. The default value is 1.
command to configure the default type when OSPF
default type
undo
default type
default tag
value
Enter the cost value of the default route transmitted by OSPF to a Stub or
OSPF Configuration Commands
command to restore the default type. By default,
.
183