Rip Input - 3Com 5500G-EI Command Reference Manual

170 C 6: U R
HAPTER SING

rip input

P C
OUTING ROTOCOL OMMANDS
Use the
rip authentication-mode simple
simple text authentication key.
Use the
rip authentication-mode md5 usual
MD5 cipher text authentication key for RIP-2.
Use the
rip authentication-mode md5 nonstandard
command to configure the MD5 cipher text authentication ID for RIP-2.
Use the
undo rip authentication-mode
authentication.
There are two RIP-2 authentication modes: simple authentication and MD5 cipher
text authentication. When you use MD5 cipher text authentication mode, two
types of packet formats are available. The standard format (set using the
parameter), is described in RFC 1723. The non-standard format (set using the
parameter), is described in RFC 2082.
nonstandard
RIP-1 does not support authentication.
Related command:
Example
To specify the interface "Vlan-interface 1" to use
key set to "aaa", enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]rip version 2
[SW5500-Vlan-interface1]rip authentication-mode simple aaa
To specify the interface Vlan-interface 1 to use MD5 authentication with the key
string as "aaa" and the packet type set to
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]rip version 2
[SW5500-Vlan-interface1]rip authentication-mode md5 key-string aaa
[SW5500-Vlan-interface1]rip authentication-mode md5 type nonstandard
To set MD5 authentication on Vlan-interface 1 with the key string set to "aaa"
and the packet type set to
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]rip version 2
[SW5500-Vlan-interface1]rip authentication-mode md5 usual aaa
Syntax
rip input
undo rip input
View
Interface View
.
rip version
, enter the following:
usual
command to configure the RIP-2
to configure the
key-string
key-string key-id
command to cancel RIP-2
authentication with the
simple
, enter the following:
usual
usual