Rip Metricout; Rip Output - 3Com 5500G-EI Command Reference Manual

172 C 6: U R
HAPTER SING

rip metricout

rip output

P C
OUTING ROTOCOL OMMANDS
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]rip metricin 2
Syntax
rip metricout
undo rip metricout
View
Interface View
Parameter
Enter an additional route metric added when transmitting a packet,
value
ranging from 1 to 16. By default, the value is 1.
Description
Use the
rip metricout
added to a route when an interface transmits RIP packets.
Use the
undo rip metricout
additional route metric.
Related command:
Example
To set the additional route metric to 2 when the interface Vlan-interface 1
transmits RIP packets, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]rip metricout 2
Syntax
rip output
undo rip output
View
Interface View
Parameter
None
Description
Use the
rip output
Use the
undo rip output
packets.
By default, all interfaces except loopback interfaces are able to transmit RIP
packets.
value
command to configure an additional route metric to be
command to restore the default value of the
.
rip metricin
command to allow an interface to transmit RIP packets.
command to disable an interface from transmitting RIP