Dot1X Dhcp-Launch; Dot1X Max-User - 3Com 5500G-EI Command Reference Manual

346 C 11: U
HAPTER SING

dot1x dhcp-launch

dot1x max-user

AAA RADIUS C
AND OMMANDS
not necessary to transfer the EAP packet to a standard RADIUS packet first and
then send it to RADIUS server.
To use PAP, CHAP or EAP authentication, RADIUS server should support PAP, CHAP
or EAP authentication respectively.
Related command:
Example
Configure 802.1x user to use PAP authentication
<SW5500>system-view
System View: return to User View with Ctrl-Z
[SW5500]dot1x authentication-method pap
Syntax
dot1x dhcp-launch
undo dot1x dhcp-launch
View
System View
Parameter
None
Description
Use the
dot1x dhcp-launch
triggering user ID authentication for users who configure static IP addresses in a
DHCP environment. Use the
Switch to trigger ID authentication.
By default, the Switch can trigger user ID authentication for users who configure
static IP addresses in a DHCP environment.
Related command:
Example
Prevent the Switch from triggering the authentication ID for users who configure
static IP addresses in a DHCP environment.
<SW5500>system-view
System View: return to User View with Ctrl-Z
[SW5500]dot1x dhcp-launch
Syntax
dot1x max-user
undo dot1x max-user [ interface
View
Ethernet Port View
.
display dot1x
command to set 802.1x to prevent the Switch from
undo dot1x dhcp-launch
.
dot1x
user-number [ interface
interface-list
command to allow the
interface-list ]
]