Snmp-Agent Group - 3Com 5500G-EI Command Reference Manual

snmp-agent group

Parameter
: Indicates that this community name has the read-only right within the
read
specified view.
: Indicates that this community name has the read-write right within the
write
specified view.
: Character string of the community name.
community-name
: Set the MIB view name which can be accessed by the community
mib-view
name.
: MIB view name.
view-name
: The number identifier of basic number-based ACLs, ranging
acl-number
acl
from 2000 to 2999
Description
Using the
snmp-agent community
name, permit the access to the Switch using SNMP, and reference the ACL to
perform ACL control to the network management users by acl-number. Using the
undo snmp-agent community
community access name.
By default, SNMPV1 and SNMPV2C use community name to perform access.
Example
Set the community name as "MyCompany", permit the user to perform read-only
access by using this community name, and reference the ACL 2000 to perform
ACL control to the network management users (basic ACL 2000 has already been
defined ).
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]snmp-agent community read MyCompany acl 2000
Syntax
snmp-agent group { v1 | v2c }
write-view w rite-view
undo snmp-agent group { v1 | v2c }
snmp-agent group v3
read-view read-view
notify-view ] [ acl
undo snmp-agent group v3
View
System View
Parameter
V1 security mode.
v1:
Logon user's ACL Control Command
command, you can set the community access
command, you can remove the setting of
group-name
] [ notify-view notify-view
group-name
group-name
[ authentication | privacy ] [
] [ write-view write-view
acl-number ]
group-name
[ authentication | privacy ]
[ read-view read-view
] [acl acl-number
] [ notify-view
313
] [
]