Local-Server - 3Com 5500G-EI Command Reference Manual

380 C 11: U
HAPTER SING

local-server

AAA RADIUS C
AND OMMANDS
To set the authentication/authorization key of the RADIUS scheme to "hello",
enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]radius scheme 3Com
[SW5500-radius-3Com]key authentication hello
Example 2:
To set the accounting packet key of the RADIUS scheme to "ok", enter the
following:
[SW5500-radius-3Com]key accounting ok
Syntax
local-server nas-ip
undo local-server nas-ip
View
System View
Parameter
nas-ip ip-address
in the format of dotted decimal. By default, there is a local server with the NAS-IP
address of 127.0.0.1.
key password :
containing up to 16 characters.
Description
Use the
local-server
authentication server. Use the
RADIUS authentication server.
RADIUS service, which adopts authentication/authorization/accounting servers to
manage users, is widely used in the Switch 5500G-EI. Besides, local
authentication/authorization service is also used in these products and it is called
local RADIUS authentication server function, that is, realize basic RADIUS function
on the Switch.
When using local RADIUS authentication server function, remember the number
of the UDP port used for authentication is 1645 and that for accounting is 1646.
The password configured by this command must be the same as that of the
RADIUS authentication/authorization packet configured by the command
authentication
The Switch 5500G-EI Family supports up to 16 local RADIUS authentication
servers.
Related commands:
ip-address key
ip-address
set NAS-IP address of access server.
:
Set password of logon user.
command to configure the parameters of local RADIUS
undo local-server
in the RADIUS Scheme View.
,
radius scheme state
password
ip-address
is a character string
password
command to cancel a local
and .
key
is expressed
key