Info-Center Loghost - 3Com 5500G-EI Command Reference Manual

464 C 12: U
HAPTER SING

info-center loghost

S M C
YSTEM ANAGEMENT OMMANDS
Description
Use the
info-center logbuffer
to the memory buffer. Use the
cancel the information output to buffer
This command takes effect only after the system logging is enabled.
For the related commands, see
Example
Send log information to buffer and sets the size of buffer as 50.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]info-center logbuffer 50
Syntax
info-center loghost
channel-name
} | facility
} ]
undo info-center loghost
View
System view
Parameter
host-ip-addr:
Configure information channel of the info-center loghost.
channel:
channel-number:
channels.
channel-name:
channel7, channel8, channel9, console, logbuffer, loghost, monitor,
snmpagent, trapbuffer.
Configure the recording tool of info-center loghost.
facility:
local-number:
Set the logging language.
language:
chinese, english:
Description
Use the
info-center loghost
loghost to send information to it. Use the
to cancel output to info-center loghost.
By default, switches do not output information to info-center loghost.
This command takes effect only after the system logging is enabled.
command to configure to output information
undo info-center logbuffer
info-center enable
host-ip-addr
local-number
host-ip-addr
IP address of info-center loghost.
Channel number, ranging from 0 to 9, that is, system has ten
Specify the channel name. The name can be
Record tool of info-center loghost, ranging from local0 to local7.
Language used in log file.
command to set the IP address of the info-center
,
display info-center
[ channel {
channel-number
| language { chinese | english
channel6,
undo info-center loghost
command to
.
|
command