Display Rmon Prialarm - 3Com 5500G-EI Command Reference Manual

494 C 12: U
HAPTER SING

display rmon prialarm

S M C
YSTEM ANAGEMENT OMMANDS
Table 65 Output description of the display rmon history command
Field
History control table
3COM
VALID
Samples interface
Sampling interval
buckets
dropevents
octets
packets
broadcastpackets
multicastpackets
CRC alignment errors
undersized
oversized packets
fragments
jabbers
collisions
utilization
Syntax
display rmon prialarm [
View
All views
Parameter
prialarm-table-entry
Description
Use the
display rmon prialarm
extended alarm table.
Related command:
Example
Display alarm information about extended RMON.
<SW5500>display rmon prialarm
Prialarm table 1 owned by 3Com is VALID.
Samples
Sampling interval
Rising threshold
Falling threshold
When startup enables
This entry will exist
Latest value
Description
Index number in history control table
Owner
The entry corresponding to the index is valid
The sampled interface
Sampling interval
Records in history control table
Dropping packet events
Sent/received octets in sampling time
Packets sent/received in sampling time
Number of broadcast packets
Number of multicast packets
Number of CRC error packets
Number of undersized packets
Number of oversized packets
Number of undersized and CRC error packets
Number of oversized and CRC error packets
Number of collision packets
Utilization
prialarm-table-entry
entry of extended alarm table.
:
command to display information about
.
rmon prialarm
absolute value : .1.3.6.1.2.1.16.1.1.1.4.1
: 10(sec)
: 1000(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: forever.
: 0
]