Rename; Reset Recycle-Bin - 3Com 5500G-EI Command Reference Manual

Description
Use the
Error may occur without setting the current path.
Example
Display the current path.
<SW5500>pwd
unit1>flash:

rename

Syntax
rename
View
User view
Parameter
filepath
filepath
Description
Use the
If the destination file name is the same as an existing directory name, the rename
operation will fail. If the destination file name is the same as an existing file name,
a prompt will be displayed asking whether to overwrite the existing file.
Example
Display the current directory information.
<SW5500>dir
Directory of unit1>flash:
16125952 bytes total (13970432 bytes free)
Rename the file sample.txt with sample.bak.
<SW5500>rename sample.txt sample.bak
Rename flash:/sample.txt to flash:/sample.bak ?[confirm]:y
% Renamed file unit1>flash:/sample.txt unit1>flash:/sample.bak
Display the directory after renaming sample.txt with sample.bak.
<SW5500>dir
Directory of unit1>flash:
16125952 bytes total (13970432 bytes free)

reset recycle-bin

Syntax
reset recycle-bin
command to display the current path.
pwd
filepath-source filepath-dest
Source file name.
source
- :
Destination file name.
- dest :
command to rename a file.
rename
0 drw- 0 Jul 12 2001 19:41:20
1 -rw- 50 Jul 12 2001 20:26:48
0 -rw- 2145718
1 drw- 0
2 -rw- 50
file-path [/force]
File System Management Commands
Jul 12 2001 12:28:08
Jul 12 2001 19:41:20
Jul 12 2001 20:29:55
test
sample.txt
ne80.bin
test
sample.bak
409