Pim; Pim Bsr-Boundary - 3Com 5500G-EI Command Reference Manual

272 C 7: U M
HAPTER SING

pim

pim bsr-boundary

P C
ULTICAST ROTOCOL OMMANDS
Syntax
pim
undo pim
View
System View
Parameter
None
Description
Use the to enter the PIM View.
pim
Use the
undo pim
The global parameters of PIM can only be configured in PIM View.
Example
Enable multicast and enter the PIM View.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]multicast routing-enable
[SW5500]pim
[SW5500-pim]
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
Interface View
Parameter
None
Description
Use the
pim bsr-boundary
border.
Use the
undo pim bsr-boundary
By default, no domain border is set.
You can use this command to set a border for bootstrap messages, that is to say,
bootstrap messages cannot pass interfaces that are configured with the
command while other PIM messages can. In this way, the network
bsr-boundary
is divided into different BSR domains.
It should be noted that this command cannot set up multicast boundaries. It only
sets up a PIM domain bootstrap message border.
to clear the configurations in PIM View.
to configure an interface to be the PIM domain
to remove the border.
pim