Display Arp Timer Aging; Reset Arp - 3Com 5500G-EI Command Reference Manual

display arp timer aging

reset arp

Table 10 Output Description of the
Field Description
IP Address IP address of the ARP mapping entry
MAC Address MAC address of the ARP mapping entry
VLAN ID VLAN to which the static ARP entry belongs
Port Name Port to which the static ARP entry belongs
Aging Aging time of dynamic ARP entry in minutes
Type Type of ARP entry
Syntax
display arp timer aging
View
All views.
Parameter
None.
Description
Use the
display arp timer aging
dynamic ARP aging timer.
Example
To display the current setting of the dynamic ARP aging timer, enter the following:
<SW5500>display arp timer aging
The information displays in the following format:
Current ARP aging time is 10 minute(s)
Syntax
reset arp [ dynamic | static | interface {
interface_num | interface_name
View
User view
Parameters
Enter to clear the dynamic ARP mapping entries. Note that dynamic ARP
dynamic
entries start re-learning immediately.
Enter to clear the static ARP mapping entries. Note that static ARP entries
static
are deleted permanently.
interface_type interface_num interface_name
interface
ARP mapping entries for the specified port.
ARP Configuration Commands
Command
display arp
command to view the current setting of the
interface_type
} ]
111
Enter to clear the