Tcp Timer Fin-Timeout; Tcp Timer Syn-Timeout - 3Com 5500G-EI Command Reference Manual

tcp timer fin-timeout

tcp timer syn-timeout

Example
To clear the UDP traffic statistics information, enter the following:
<SW5500>reset udp statistics
Syntax
tcp timer fin-timeout
undo tcp timer fin-timeout
View
System View
Parameter
Enter the TCP finwait timer value in second, with the value ranging
time-value
from 76 to 3600; By default, 675 seconds.
Description
Use the
tcp timer fin-timeout
Use the
undo tcp timer fin-timeout
the TCP finwait timer.
When the TCP connection state changes from FIN_WATI_1 to FIN_WAIT_2, the
finwait timer is enabled. If the switch does not receive FIN packet before finwait
timer timeouts, the TCP connection will be terminated.
Related commands:
tcp timer syn-timeout
Example
To configure the TCP finwait timer value as 800 seconds, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]tcp timer fin-timeout 800
Syntax
tcp timer syn-timeout
undo tcp timer syn-timeout
View
System View
Parameter
Enter the TCP synwait timer value measured in second, whose value
time-value
ranges from 2 to 600. The default time-value is 75 seconds.
Description
Use the
tcp timer syn-timeout
IP Performance Configuration Commands
time-value
command to configure the TCP finwait timer.
command to restore the default value of
,
tcp window
time-value
command to configure the TCP synwait timer.
141
.